Công suất Electro-Voice TG-7

Thông số kỹ thuật Công suất Electro-Voice TG-7

+ Continuous Rated Power (1 kHz, THD 1%) 2Ω    3500 Watts
+ Continuous Rated Power (1 kHz, THD 1%) 4Ω    2500 Watts
+ Continuous Rated Power (1 kHz, THD 1%) 8Ω    1500 Watts
+ Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    2100 Watts
+ Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω    1050 Watts
+ Control Protocol    CAN Bus
+ D/A Conversion    24 Bit, Sigma-Delta, 128 times over-sampling
+ Data Format    24 Bit linear A/D and D/A conversion, 48 Bit processing
+ Digital Inputs    Optional with RCM-26
+ DIM 30    0.02 %
+ FIR-Drive    Optional with RCM-26
+ GPIO Control Ports    1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
+ Impedance    2/4/8 Ω
+ Input Impedance (Balanced)    20 kΩ
+ Input Sensitivity    0/+6/+9 Selectable
+ Intermodulation Distortion (SMPTE)    0.05 %
+ Internal Processing    2 DSPs (150 MHz, 300 MIPS)
+ Maximum Bridged Output 4Ω    7000 Watts
+ Maximum Bridged Output 8Ω    5000 Watts
+ Network Control (IRIS-Net)    Optional with RCM-26
+ Power Consumption    1450 W
+ Power Supply    100-240 V, 50-60 Hz
+ Sample Rate    48 kHz
+ Sample Rate Conversion (SRC)    32 kHz – 192 kHz, internal Sample-Rate- Converter
+ Signal-to-Noise Ratio (A-weighted)    111 dB
+ Slew Rate    35 V/µs
+ Topology    Class-H grounded bridge
+ Total Harmonic Distortion    0.05 %
+ Height    2RU 88.1 mm (3.47″)
+ Width    482.6 mm (19″)
+ Depth    512 mm (20.16″)
+ Weight Net    14.5 kg (31.97 lbs)